README.md · 1.9 KiB · Markdown Raw

# Element14 Pi-Desktop scripts for LibreELEC

This gist contains the files needed to make Pi-Desktop's power butoon work in LibreELEC.
Due to hardware limitations in the Pi-Desktop this button turns off the Raspberry Pi instead of opening the power menu.

## Setup 
 
1. Install the Raspberry Pi Tools add-on
  - `System (settings)` -> `Add-ons` -> `Install from repozitory` -> `LibreELEC Add-ons` -> `Program add-ons` -> `Raspberry Pi Tools` -> `Install`
2. Get SSH access
  - `System (settings)` -> `LibreELEC` -> `Services` -> `Enable SSH`
    - If you don't setup a password the default is `libreelec`
    - Keep in mind that the default password should be changed or SSH turned off for better security.
  - `System (settings)` -> `LibreELEC` -> `Connections` -> `Address: aaa.bbb.c.ddd`
    - Get the IP address of the device by looking at the connection used
3. SSH to the device: `ssh root@aaa.bbb.c.ddd`
4. Run the install script: `curl -sSL https://opengist.stefka.eu/jiriks74/element14-libreelec/raw/HEAD/install.sh | bash`
5. The light should blink once to indicate that the power button script started successfully
  - It will blink once on every boot to indicate that the Pi comunicates with the power supply

## Manual setup

If you're uncomfortable running a scripts from the internet you can fetch the files yourself and save them like this:

```bash
/storage/scripts/pidesktop/powerkey.py
/storage/.config/system.d/pidesktop-powerkey.service
```
 
Then you need to run `systemctl enable pidesktop-powerkey` to start the scripts on boot and `systemctl start pidekstop-powerkey` to start it now.

The light on the case should blink once to indicate that the script initialized successfully.

## Usage
 
The power key can do 2 things on the Pi Desktop
- When held for 2 seconds it sends a power off signal to the Pi (only once, more keypresses don't do anything)
- When held for 5 seconds it cuts off power from the Pi (as if you unplugged if from wall power)

Element14 Pi-Desktop scripts for LibreELEC

This gist contains the files needed to make Pi-Desktop's power butoon work in LibreELEC. Due to hardware limitations in the Pi-Desktop this button turns off the Raspberry Pi instead of opening the power menu.

Setup

Install the Raspberry Pi Tools add-on

System (settings) -> Add-ons -> Install from repozitory -> LibreELEC Add-ons -> Program add-ons -> Raspberry Pi Tools -> Install

Get SSH access

System (settings) -> LibreELEC -> Services -> Enable SSH
- If you don't setup a password the default is libreelec
- Keep in mind that the default password should be changed or SSH turned off for better security.
System (settings) -> LibreELEC -> Connections -> Address: aaa.bbb.c.ddd
- Get the IP address of the device by looking at the connection used

SSH to the device: ssh root@aaa.bbb.c.ddd
Run the install script: curl -sSL https://opengist.stefka.eu/jiriks74/element14-libreelec/raw/HEAD/install.sh | bash
The light should blink once to indicate that the power button script started successfully

It will blink once on every boot to indicate that the Pi comunicates with the power supply

Manual setup

If you're uncomfortable running a scripts from the internet you can fetch the files yourself and save them like this:

/storage/scripts/pidesktop/powerkey.py
/storage/.config/system.d/pidesktop-powerkey.service

Then you need to run systemctl enable pidesktop-powerkey to start the scripts on boot and systemctl start pidekstop-powerkey to start it now.

The light on the case should blink once to indicate that the script initialized successfully.

Usage

The power key can do 2 things on the Pi Desktop

When held for 2 seconds it sends a power off signal to the Pi (only once, more keypresses don't do anything)
When held for 5 seconds it cuts off power from the Pi (as if you unplugged if from wall power)

install.sh · 1.1 KiB · Bash Raw

#!/bin/bash
set -e

echo "Creating directories..."
mkdir -p /storage/scripts/pidesktop

echo "Downloading files..."
curl -s "https://opengist.stefka.eu/jiriks74/element14-libreelec/raw/HEAD/powerkey.py" -o /storage/scripts/pidesktop/powerkey.py
curl -s "https://opengist.stefka.eu/jiriks74/element14-libreelec/raw/HEAD/pidesktop-powerkey.service" -o /storage/.config/system.d/pidesktop-powerkey.service
echo "Files downloaded successfully."

echo "Loading the systemd service..."
systemctl daemon-reload
systemctl enable pidesktop-powerkey
echo "Service loaded. Starting the service..."
echo "Watch the case now. The light should blink once/twice to indicate that the the script is working."
sleep 5
systemctl start pidesktop-powerkey

echo ""
echo "Setup finished."
echo "The power button should work now."
echo ""
echo "Disclaimer: Reboot might not be possible anymore. The Pi-Desktop cuts power after 30 seconds of no response from the Pi."
echo "            If the Pi takes more than 30 seconds to reboot the Pi-Desktop will cut it's power and you'll have to turn it on again."

1	#!/bin/bash
2	set -e
3
4	echo "Creating directories..."
5	mkdir -p /storage/scripts/pidesktop
6
7	echo "Downloading files..."
8	curl -s "https://opengist.stefka.eu/jiriks74/element14-libreelec/raw/HEAD/powerkey.py" -o /storage/scripts/pidesktop/powerkey.py
9	curl -s "https://opengist.stefka.eu/jiriks74/element14-libreelec/raw/HEAD/pidesktop-powerkey.service" -o /storage/.config/system.d/pidesktop-powerkey.service
10	echo "Files downloaded successfully."
11
12	echo "Loading the systemd service..."
13	systemctl daemon-reload
14	systemctl enable pidesktop-powerkey
15	echo "Service loaded. Starting the service..."
16	echo "Watch the case now. The light should blink once/twice to indicate that the the script is working."
17	sleep 5
18	systemctl start pidesktop-powerkey
19
20	echo ""
21	echo "Setup finished."
22	echo "The power button should work now."
23	echo ""
24	echo "Disclaimer: Reboot might not be possible anymore. The Pi-Desktop cuts power after 30 seconds of no response from the Pi."
25	echo " If the Pi takes more than 30 seconds to reboot the Pi-Desktop will cut it's power and you'll have to turn it on again."
26

pidesktop-powerkey.service · 208 B · SYSTEMD Raw

1	[Unit]
2	Description=pidesktop power button service
3	After=local-fs.target
4
5	[Service]
6	Type=simple
7	User=root
8	ExecStart=/usr/bin/python /storage/scripts/pidesktop/powerkey.py
9
10	[Install]
11	WantedBy=multi-user.target
12

powerkey.py · 1.2 KiB · Python Raw

#!/usr/bin/env python
#
# pd-powerkey.py - monitor GPIO to detect power key press from Power MCU (PCU)
#

import time,os,sys
os.chdir('/storage/scripts/pidesktop/')
sys.path.append('/storage/.kodi/addons/virtual.rpi-tools/lib') # Import gpiozero from Raspberry Pi Tools add-on
from gpiozero import Button,LED

print("pidesktop: power button service initializing")

pwrBtn = Button(13) # PCU to Pi - detect power key pressed

pcu = LED(6) # Pi to PCU - start/stop shutdown timer
pcu.off() # tell PCU we are alive
pcu.on() # cause blink by starting shutdown timer
time.sleep(0.5)
pcu.off() # clear timer to stop blinking and prefent forced power off

# callback function
def powerkey_pressed(channels):
    print("pidesktop: power button press detected, initiating shutdown")
    os.system("sync")
    # os.system("shutdown -h now") # Shutdown the OS directly (forced shutdown)
    os.system("kodi-send --action=ShutDown") # Tell Kodi to execute it's shutdown procedure (graceful)
    sys.exit()

pwrBtn.when_released = powerkey_pressed # Setup callback for the power off signal
print("pidesktop: power button monitor enabled")

while True: # Keep the service running
    time.sleep(10)

1	#!/usr/bin/env python
2	#
3	# pd-powerkey.py - monitor GPIO to detect power key press from Power MCU (PCU)
4	#
5
6	import time,os,sys
7	os.chdir('/storage/scripts/pidesktop/')
8	sys.path.append('/storage/.kodi/addons/virtual.rpi-tools/lib') # Import gpiozero from Raspberry Pi Tools add-on
9	from gpiozero import Button,LED
10
11	print("pidesktop: power button service initializing")
12
13	pwrBtn = Button(13) # PCU to Pi - detect power key pressed
14
15	pcu = LED(6) # Pi to PCU - start/stop shutdown timer
16	pcu.off() # tell PCU we are alive
17	pcu.on() # cause blink by starting shutdown timer
18	time.sleep(0.5)
19	pcu.off() # clear timer to stop blinking and prefent forced power off
20
21	# callback function
22	def powerkey_pressed(channels):
23	print("pidesktop: power button press detected, initiating shutdown")
24	os.system("sync")
25	# os.system("shutdown -h now") # Shutdown the OS directly (forced shutdown)
26	os.system("kodi-send --action=ShutDown") # Tell Kodi to execute it's shutdown procedure (graceful)
27	sys.exit()
28
29	pwrBtn.when_released = powerkey_pressed # Setup callback for the power off signal
30	print("pidesktop: power button monitor enabled")
31
32	while True: # Keep the service running
33	time.sleep(10)
34